Help

TRB Webinar: Control of Concrete Cracking in Bridges


Date(s)
August 17, 2017 02:00 PM - 03:30 PM U.S. Eastern
Cost (for your seat)
$95.00
Professional Development Hours for this webinar
1.50 hour(s)
Continuing Education Hours for this webinar
AAE: 0.00 hour(s)
AICP: 0.00 hour(s)
CLE: 0.00 hour(s)
Details

TRB will conduct a webinar on Thursday, August 17, 2017 from 2:00 PM to 3:30 PM ET that features research from the National Cooperative Highway Research Program (NCHRP)’s Synthesis 500: Control of Concrete Cracking in Bridges.

This webinar will examine the methods used to control concrete cracking in bridge superstructures and substructures and on the influence of cracking on long-term durability. The control of cracking for aesthetic, durability, and structural reasons becomes increasingly important as service-life goals are extended and higher-strength concrete, higher-strength reinforcement, and different types of reinforcement are used in bridge construction.

Some registrants will need to pay a fee to attend this webinar. Sign into MyTRB.org to view registration information.


Webinar Presenters

  • Bijan Khaleghi, Washington State Department of Transportation

Moderated by: Ben Graybeal, Federal Highway Administration Turner Fairbank Research Center

 

Webinar Outline

  1. Overview of NCHRP
  2. Control of Concrete Cracking in Bridges
    • Multiple methods of enhancing concrete bridge deck performance
  3. Question and answer session

The first 60 minutes of the webinar will be for presentations and the final 30 minutes will be reserved for audience questions. The Registered Continuing Education Program (RCEP) categorizes this webinar activity as relating to health, safety, and welfare including core technical.

 

Learning Objectives

At the end of this webinar, participants will be able to:

  • Understand the methods used to control concrete cracking in bridge superstructures and substructures
  • Understand the influence of cracking on long-term durability

 

Professional Development Hour Information

A certificate for 1.5 Professional Development Hours (PDHs) will be provided to Professional Engineers (PEs) who register and attend the webinar as an individual. For groups, only the person that registers and attends the session will receive a PDH certificate. Certificates of Completion will be issued only to individuals who register for and attend the entire webinar session.

Individuals registered as Florida PEs are no longer required to email TRB with your license number to report your attendance. Instead, please use your certificate that TRB provides through RCEP.net as verification of your attendance to the Florida Board of Professional Engineers.

Please check with your licensing board to ensure that TRB webinar PDHs are approved by your board.

This webinar was developed in March 2017. TRB has met the standards and requirements of the Registered Continuing Education Program (RCEP). Credit earned on completion of this program will be reported to RCEP by TRB. Complaints about registered providers may be sent to RCEP, 1015 15th Street, NW, 8th Floor, Washington, DC 20005. Website: www.RCEP.net.

Registration questions? Contact Reggie Gillum at RGillum@nas.edu