TRB Webinar: Internal Curing of Concrete Pavements: State-of-the-Practice

May 24, 2018 02:00 PM - 03:30 PM U.S. Eastern
Cost (for your seat)
Professional Development Hours for this webinar
1.5 hour(s)
Continuing Education Hours for this webinar
AAE: 0.0 hour(s)
AICP: 0.0 hour(s)
CLE: 0.0 hour(s)

TRB will conduct a webinar on Thursday, May 24, 2018 from 2:00PM to 3:30PM ET that will provide an overview of the primary concepts of internal curing for concrete pavements. This webinar will focus on information in Technical Brief FHWA-HIF-16-006.* Presenters will discuss the practical applications, mixture design, and quality control of internally cured concrete pavements. This webinar builds upon content discussed during a webinar conducted by TRB in February 2017.

This webinar was organized by the TRB Standing Committees on Design and Rehabilitation of Concrete and Concrete Pavement Construction and Rehabilitation. 

*The opinions and conclusions expressed or implied in this webinar are those of the researchers who performed the research. They are not necessarily those of the Transportation Research Board or the National Academies of Sciences, Engineering, and Medicine.

Some registrants will need to pay $95 to attend this webinarSign into to view registration information.

Webinar Presenters

  • Jason Weiss, Oregon State University
  • Don Streeter, New York State Department of Transportation

Moderated by:  Sam Tyson, Federal Highway Administration

Webinar Outline

  1. Introduction to internal curing
  2. Pavement applications
    • Mixture design
    • Concrete pavement construction aspects
    • Properties of internally cured concrete
  3. Agency perspective
    • Experiences and lessons learned at New York State Department of Transportation (NYSDOT)
  4. Question and answer session

The first 60 minutes of the webinar will be for presentations and the final 30 minutes will be reserved for audience questions. The Registered Continuing Education Program (RCEP) categorizes this webinar activity as relating to health, safety, and welfare including core technical.

Learning Objectives

At the end of this webinar, participants will be able to:

  • Describe the fundamentals of internally cured concrete pavements and their applications
  • List the materials used for internally cured pavement applications
  • Describe the process of construction for internally cured pavements
  • Apply lessons learned from NYSDOT’s experience with internal curing

Professional Development Hour Information

A certificate for 1.5 Professional Development Hours (PDHs) will be provided to Professional Engineers (PEs) who register and attend the webinar as an individual. For groups, only the person that registers and attends the session will receive a PDH certificate. Certificates of Completion will be issued only to individuals who register for and attend the entire webinar session.

Individuals registered as Florida PEs are no longer required to email TRB with your license number to report your attendance. Instead, please use your certificate that TRB provides through as verification of your attendance to the Florida Board of Professional Engineers.

Please check with your licensing board to ensure that TRB webinar PDHs are approved by your board.

This webinar was developed in October 2017. TRB has met the standards and requirements of the Registered Continuing Education Program (RCEP). Credit earned on completion of this program will be reported to RCEP by TRB. Complaints about registered providers may be sent to RCEP, 1015 15th Street, NW, 8th Floor, Washington, DC 20005. Website:

Registration questions? Contact Reggie Gillum at