Help

TRB Webinar: Chip Seals, Microsurfacing, and Fog Seals Specifications


Date(s)
September 14, 2021 01:00 PM - 03:00 PM U.S. Eastern
Cost (for your seat)
$95.00
Professional Development Hours for this webinar
2.00 hour(s)
Continuing Education Hours for this webinar
AAE: 0.00 hour(s)
AICP: 0.00 hour(s)
CLE: 0.00 hour(s)
Details

Pavement preservation is a means of maintaining and improving the functional condition of an existing highway system, generally leading to improved pavement performance and longer service life. There are, however, considerable variations among states regrading specifications for construction of chip seals, microsurfacing, and fog seals. TRB hosted a webinar on Tuesday, September 14, 2021 from 1:00-3:00 Eastern that presented the findings from a study and resulting construction guide specifications of these items. Presenters discussed ways to use the guide to serve as complete construction specifications or fill gaps in existing construction specifications. These construction guides have been approved by AASHSTO Committee on Materials and Pavements (COMP).

This webinar was sponsored by the Technical Standing Committee on Pavement Preservation.

The slides and recording are available.



Webinar agenda and presenters

  1. Construction of emulsion chip seals and emulsion fog seals: Scott Shuler, Shuler Consultants, LLC
  2. Construction of hot applied chip seals: R. Gary Hicks, R. Gary Hicks, LLC
  3. Construction of microsurfacing: James Moulthrop, Fugro Roadware, Inc.
  4. Agency perspective using fog and rejuvenating seals: John Fox, California Department of Transportation
  5. Question and answer session: Moderated by DingXin Cheng, California Pavement Preservation Center, California State University, Chico

The first 90 minutes of the webinar will be for presentations and the final 30 minutes will be reserved for audience questions.

Learning Objectives

At the end of this webinar, participants will be able to:

  1. Identify factors important to the construction of chip seals, microsurfacing, and fog seals
  2. Discuss recent advancement in the construction of chip seals, microsurfacing, and fog seals
  3. Discuss gaps and experiences in the construction of chip seals, microsurfacing, and fog seals

 

Professional Development Hours

Professional Development Hours (PDHs) earned on completion of this program were reported to the Registered Continuing Education Program (RCEP). Certificates of Completion are issued to all participants via the RCEP.net online system. Complaints about registered providers may be addressed to RCEP, 1015 15th Street, NW, 8th Fl., Washington, DC, 20005.